Elegant Ceiling Medallions, Ceiling Fan Mediallions, Decorative Ceiling Medallions

Polymer Ceiling Medallions, Domes and Panels:

Wholesale discounts on elegant cast ceiling medallions, rings and panels in high density polyurethane with over 80 designs and sizes from 6 inches to 76 inches for accenting any size room or light fixture. Also offering an extensive selection of decorative crown moulding and ceiling trim.

Please click on one of the images to see all the designs in that size group:

Small Ceiling Medallions
6 in. - 15 in.
12 Designs

Medium Ceiling
Medallions 15 in. - 22 in.
20 Designs

Large Ceiling Medallions
25 in. - 30 in.
17 Designs

Extra Large Ceiling Medallions
30 in. - 46 in.
11 Designs

Ceiling Domes & Rings
15 Designs

Ceiling Panels
5 Designs

Polymer Mouldings and Corner Sets

Wall Niches
15 Designs

Selecting and Installing Ceiling Medallions
Choosing the correct ceiling medallion style for the room should be your first priority. We recommend cutting a paper template to the size of the ceiling medallion you like to see if the ceiling medallion fits the room. Be sure it's the correct size for the room and that the design fits with the era of the home. Today's polymer ceiling medallions are more lightweight, affordable and easier to install than heavier plaster versions. Cumberland Woodcraft ceiling medallions are chosen for their ornate designs of days gone by.

A ceiling medallion goes hand-in-hand with crown moulding and adds a decorative touch. If you are considering a ceiling medallion for your light or ceiling fan, then there is no reason to bring in a master plasterer. Cumberland Woodcraft has over 65 ceiling medallions to choose from, ranging from 6 inches to 74 1/4 inches in size. Our ceiling medallions are available in simple, classic designs, ornate floral patterns and traditional styles - solid pieces with are usually placed in the center of the room on the ceiling as an accent piece. If you choose a style without the center cut, since it is a polymer product, the material is easy to cut. Cut the hole in the middle of the ceiling medallion so the wires for your fixture can be connected. Then glue the ceiling medallion to the ceiling as instructed on the tube of adhesive. After the glue has dried, connect the fan or light fixture the same way you would if the medallion weren't there. If you would like, please email us any questions you may have regarding installation.

Such a project should take about 24 hours for the Premium Polyurethane Construction Adhesive, specially formulated to be used with polymer millwork, to cure. Or, if you would like, you could use "liquid nails" or any construction adhesive that will work with polymer products. Curing times will vary with temperature. Be sure to read the installation instructions on the adhesive for proper bonding. A couple of two-by-twos cut to length will hold the ceiling medallion in place while the adhesive dries, or you could use fasteners. You will need to patch the fasteners and we recommend auto body "Bondo." This is easy to use, easy to get and paints very well. This is a decorative piece of art and the time given in drying will yield a much better quality product for you in the end.